Akos Kiss
da24727824
Hitherto, code under the `targets` directory was not tested and so its maintenance was sometimes speculative. This commit adds build testing for several targets to prevent them from bit rotting. Targets covered by this commit are: ESP8266, Mbed, Mbed OS 5, NuttX, RIOT, Tizen RT, and Zephyr. Some issues were revealed and fixed: - ESP8266: added missing include for `uint32_t` typedef. - Tizen RT: replaced missing `str_to_uint` with `strtol`. JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
About
Files in this folder (targets/esp8266) are copied from
examples/project_template of esp_iot_rtos_sdk and modified for JerryScript.
You can view online from
this page.
How to build JerryScript for ESP8266
1. SDK
Follow this page to setup build environment
2. Building JerryScript
# assume you are in jerryscript folder
make -f ./targets/esp8266/Makefile.esp8266
Output files should be placed at $BIN_PATH
3. Flashing for ESP8266 12E
Follow this page to get details about this board.
make -f ./targets/esp8266/Makefile.esp8266 flash
Default USB device is /dev/ttyUSB0. If you have different one, give with USBDEVICE, like;
USBDEVICE=/dev/ttyUSB1 make -f ./targets/esp8266/Makefile.esp8266 flash
4. Running
- power off
- connect GPIO2 with serial of 470 Ohm + LED and to GND
- power On
LED should blink on and off every second
5. Cleaning
To clean the build result:
make -f ./targets/esp8266/Makefile.esp8266 clean
To clean the board's flash memory:
make -f ./targets/esp8266/Makefile.esp8266 erase_flash
6. Optimizing initial RAM usage (ESP8266 specific)
The existing open source gcc compiler with Xtensa support stores const(ants) in the same limited RAM where our code needs to run.
It is possible to force the compiler to store a constant into ROM and also read it from there thus saving RAM.
The only requirement is to add JERRY_CONST_DATA attribute to your constant.
For example:
static const lit_magic_size_t lit_magic_string_sizes[] =
can be modified to
static const lit_magic_size_t lit_magic_string_sizes[] JERRY_CONST_DATA =
That is already done to some constants in jerry-core. E.g.:
- vm_decode_table
- ecma_property_hashmap_steps
- lit_magic_string_sizes
- unicode_letter_interv_sps
- unicode_letter_interv_len
- unicode_non_letter_ident_
- unicode_letter_chars