Sanggyu Lee
1501699f48
This patch is based on nuttx-stm32f4 implementation.
However, I removed vldm and vstm since artik05x has no FPU.
It fixes the following error on running some testcases under tests/jerry/fail:
System Information:
Versionarm_dataabort:
Data abort. PC: 0410d9d8 DFAR: 0a00001d DFSR: 00000008
up_assert: Assertion failed at file:armv7-r/arm_dataabort.c
line: 111 task: appmain
JerryScript-DCO-1.0-Signed-off-by: Sanggyu Lee sg5.lee@samsung.com
About
This folder contains files to build and run JerryScript on TizenRT with Artik05x board.
How to build
1. Set up build environment
- Install toolchain
Get the build in binaries and libraries, gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar.
Untar the gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar and export the path like
$ tar xvf gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar
$ export PATH=<Your Toolchain PATH>:$PATH
- Get the jerryscript and TizenRT sources
$ mkdir jerry-tizenrt
$ cd jerry-tizenrt
$ git clone https://github.com/jerryscript-project/jerryscript.git
$ git clone https://github.com/Samsung/TizenRT.git tizenrt
The following directory structure is created after these commands
jerry-tizenrt
├── jerryscript
└── tizenrt
2. Add jerryscript configuration for TizenRT
$ cp -r jerryscript/targets/tizenrt-artik05x/apps/jerryscript/ tizenrt/apps/system/
$ cp -r jerryscript/targets/tizenrt-artik05x/configs/jerryscript/ tizenrt/build/configs/sidk_s5jt200/
Apply following diff in jerry-tizenrt/tizenrt/os/FlatLibs.mk. (The line number may differ since tizenrt is under developing.)
--- a/os/FlatLibs.mk
+++ b/os/FlatLibs.mk
@@ -142,6 +142,12 @@ endif
# Add library for Framework
TINYARALIBS += $(LIBRARIES_DIR)$(DELIM)libframework$(LIBEXT)
+# Add library for Jerryscript
+ifeq ($(CONFIG_JERRYSCRIPT),y)
+TINYARALIBS += $(LIBRARIES_DIR)$(DELIM)libjerry-core$(LIBEXT)
+TINYARALIBS += $(LIBRARIES_DIR)$(DELIM)libjerry-libm$(LIBEXT)
+endif
+
# Export all libraries
3. Configure TizenRT
$ cd tizenrt/os/tools
$ ./configure.sh sidk_s5jt200/jerryscript
4. Build JerryScript for TizenRT
# assuming you are in jerry-tizenrt folder
$ cd jerryscript
$ make -f targets/tizenrt-artik05x/Makefile.tizenrt
5. Build TizenRT binary
# assuming you are in jerry-tizenrt folder
$ cd tizenrt/os
$ make
Binaries are available in tizenrt/build/output/bin
6. Flash binary
The official guide will be announced on TizenRT page.
7. Run JerryScript
You can use minicom for terminal program, or any other you may like, but set
baud rate to 115200.
(Note: Device path may differ like /dev/ttyUSB1.)
sudo minicom --device=/dev/ttyUSB0 --baud=115200