Hosung Kim
5de69b4ede
- rename artik05x to artik053 - fix to add library for jerryscript - add rom patch for artik053 - enable jerry cmd in tizenrt - change to absolute file path when loading file with jerry cmd - update README.md and config file JerryScript-DCO-1.0-Signed-off-by: Hosung Kim hs852.kim@samsung.com
About
This folder contains files to build and run JerryScript on TizenRT with Artik053 board.
How to build
1. Set up build environment
- Install toolchain
Get the build in binaries and libraries, gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar.
Untar the gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar and export the path like
$ tar xvf gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar
$ export PATH=<Your Toolchain PATH>:$PATH
- Get the jerryscript and TizenRT sources
$ mkdir jerry-tizenrt
$ cd jerry-tizenrt
$ git clone https://github.com/jerryscript-project/jerryscript.git
$ git clone https://github.com/Samsung/TizenRT.git
The following directory structure is created after these commands
jerry-tizenrt
├── jerryscript
└── TizenRT
2. Add jerryscript configuration for TizenRT
$ cp -r jerryscript/targets/tizenrt-artik053/apps/jerryscript/ TizenRT/apps/system/
$ cp -r jerryscript/targets/tizenrt-artik053/configs/jerryscript/ TizenRT/build/configs/artik053/
$ cp jerryscript/targets/tizenrt-artik053/romfs.patch TizenRT/
3. Configure TizenRT
$ cd TizenRT/os/tools
$ ./configure.sh artik053/jerryscript
4. Configure TizenRT
$ cd ../../
$ patch -p0 < romfs.patch
$ cd build/output/
$ mkdir res
# You can add files in res folder
# The res folder is later flashing into the target's /rom folder
# CAUTION: You must not exceed 400kb
5. Build JerryScript for TizenRT
# assuming you are in jerry-tizenrt folder
$ cd jerryscript
$ make -f targets/tizenrt-artik053/Makefile.tizenrt
6. Build TizenRT binary
# assuming you are in jerry-tizenrt folder
$ cd TizenRT/os
$ make
$ genromfs -f ../build/output/bin/rom.img -d ../build/output/res/ -V "NuttXBootVol"
Binaries are available in TizenRT/build/output/bin
7. Flash binary
make download ALL
For more information, see How to program a binary.
8. Run JerryScript
You can use minicom for terminal program, or any other you may like, but set
baud rate to 115200.
(Note: Device path may differ like /dev/ttyUSB1.)
sudo minicom --device=/dev/ttyUSB0 --baud=115200
Run jerry with javascript file(s)
TASH>>jerry hello.js
Hello JerryScript!
Without argument it prints:
TASH>>jerry
No input files, running a hello world demo:
Hello World from JerryScript