In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss [email protected]
Add line info data to byte, which allows getting a backtrace info directly
from the engine. Snapshots are not supported.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
Remove several macros and types from it. This change simplifies
the external debugger interface.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
Unlike normal snapshots, no part of a static snapshot is loaded into
the RAM when executed from ROM. Static snapshots rely heavily on
external magic strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
Direct strings are a new type of direct ecma-values (no memory allocation
is needed for encoding them) in JerryScript. Currently magic strings,
external magic strings and uint values are encoded as direct strings.
The constant pool of JerryScript byte-code is changed to hold ecma-values
rather than cpointers to support direct strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
Aborts are similar to exceptions except they are not caught by catch
and finally blocks. Callbacks should honor aborts as well and return
them without processing them. Aborts are never thrown by JavaScript
code.
In the future certain events such as out-of-memory condition may
also throw aborts.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
Compiled code blocks are sized in multiples of JMEM_ALIGNMENT,
but it's possible that some bytes at the end remain unused and get filled
with junk. This causes snapshot output to become nondeterministic.
To fix this, zero out the compiled code buffer before using it.
JerryScript-DCO-1.0-Signed-off-by: Martijn The [email protected]
Before this patch the JS execution is started right after the parsing
is completed. The problem is that some parts of the JS code is executed
before the debugger had any chance to insert pending breakpoints due
to network latency. This patch adds a delay after parsing when at least
one pendding breakpoint is available.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
NuttX and artik053 build - compiling with strict Werror=conversion - fail when jerry-debugger option is enabled.
This patch based on #2007, because most of them are fixed earlier within that PR, but it was closed before the land.
Credit: Piotr Marcinkiewicz [email protected]
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka [email protected]
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik [email protected]
Since the JerryScript can able to parse functions directly the
PARSER_LEXICAL_ENV_NEEDED and the PARSER_NO_REG_STORE flags
should be in the context's status flags for executing eval operations
by the debugger.
JerryScript-DCO-1.0-Signed-off-by: Imre Kiss [email protected]
Fixed an unhandled corner case while parsing slashes and template literals.
This patch fixes#2039 and adds a test case for it.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik [email protected]
This change frees up the error bit in ecma_value_t, which allows
to define 4 more value types (e.g. symbols). To keep API
compatibility we introduce a box for values with error flag.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
* Replace JERRY_JS_PARSER feature guard with JERRY_DISABLE_JS_PARSER
All feature guards of jerry-core are deciding about the inclusion
or exclusion of a feature based on the state (defined or undefined)
of a macro -- except for the JS parser guard, which requires
`JERRY_JS_PARSER` to be defined with a value of either 0 or 1. This
has some issues:
- The engine cannot be built with a "clean" compiler invocation,
i.e., without any `-D` command line macro definitions. This is
painful for targets that must use a different build system from
the project's own python/cmake-based one.
- Some build systems in targets and even some code in jerry-code
are already confused about the different semantics of
`JERRY_JS_PARSER`, and simply define it without a value and make
decisions based on the macro being simply defined or not.
This patch renames the guard to `JERRY_DISABLE_JS_PARSER` and makes
use of it in jerry-core based on its state, not based on its value.
As obvious from the guard name, the default for the JS parser is
that it is included in the build.
The patch also touches those targets in the repository that
explicitly defined the original macro (correctly or incorrectly).
* Make cppcheck verbose
Cppcheck can be quite slow sometimes, especially on Travis CI,
which has a "10 mins without output means failure" rule. As the
code base of the project grows, we start to undeterministically
fall over that limit. Thus, this PR makes cppcheck verbose to
ensure that it keeps Travis CI continuously fed with output.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss [email protected]
This patch adds direct function source code parsing, which
is useful to avoid source code duplications. The patch
also improves the Function constructor.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
If a literal was assigned the unused flag it wasn't freed, however it could have been not empty, therefore should've been freed.
JerryScript-DCO-1.0-Signed-off-by: Daniel Balla [email protected]
From now on, jerry_debugger_send_string can send a subtype of the string, making it more simple to send over strings with special parameters, therefore seperating different types of messages are simpler.
Enumerations for various subtypes can be made, while there's only need to have 2 entries for the header type.
JerryScript-DCO-1.0-Signed-off-by: Daniel Balla [email protected]
Without the file renaming there are two jerry-debugger.c files.
Thus when the jerry-core archive is created there are two objects
in it with the same name. Generally this does not create any problems.
However if the archive is extracted then the second object file
will overwrite the first one which results in undefined reference
linkage error.
The jerry- prefix was removed from the file names and
fixed the include oreders where it was needed.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal [email protected]
Currently we keep all local variables in the scope chain as long as
a nested function is alive. These variables consume memory although
several of them are never used. This patch focuses on removing those
unused ones whose can be detected at parsing time.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
Now the debugger generates a breakpoint for each function before
its first executable statement. This allows inspecting the function
arguments. Position (line and column) info is also added which
simplifies finding of anonymus functions. Several tests were
update to check more corner cases.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
Besides the breakpoint list the JavaScript source code is
also sent to the debugger. This feature allows debugging
eval() function calls.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
Two issues were fixed as well: inserting breakpoints before non-directive
prologue strings and the receive can process multiple messages.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
The server can accept a string, execute it with eval,
and returns with the result converted to string. In
case of exception it returns with the exception message.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
The debugger supports setting breakpoints, execution control (step, next, continue)
and getting backtrace. The communication is WebSocket-based, so a browser can
communicate with JerryScript without any intermediate application.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
JerryScript-DCO-1.0-Signed-off-by: Levente Orban [email protected]
In a previous patch the original null count behaviour of the
property hashmap is just only partially restored. Now it is
restored fully Also another assertion was forgot to be fixed
in another patch, and we do so now.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg [email protected]
Akos Kiss