target: tizenrt-artik053: Update porting

- rename artik05x to artik053 - fix to add library for jerryscript - add rom patch for artik053 - enable jerry cmd in tizenrt - change to absolute file path when loading file with jerry cmd - update README.md and config file JerryScript-DCO-1.0-Signed-off-by: Hosung Kim hs852.kim@samsung.com
2017-08-18 16:32:44 +09:00
parent 3b1d578050
commit 5de69b4ede
11 changed files with 143 additions and 85 deletions
@@ -0,0 +1,114 @@
+### About
+
+This folder contains files to build and run JerryScript on [TizenRT](https://github.com/Samsung/TizenRT) with Artik053 board.
+
+### How to build
+
+#### 1. Set up build environment
+
+* Install toolchain
+
+Get the build in binaries and libraries, [gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar](https://launchpad.net/gcc-arm-embedded/4.9/4.9-2015-q3-update).
+
+
+Untar the gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar and export the path like
+
+```
+$ tar xvf gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar
+$ export PATH=<Your Toolchain PATH>:$PATH
+```
+
+* Get the jerryscript and TizenRT sources
+
+```
+$ mkdir jerry-tizenrt
+$ cd jerry-tizenrt
+$ git clone https://github.com/jerryscript-project/jerryscript.git
+$ git clone https://github.com/Samsung/TizenRT.git
+```
+
+The following directory structure is created after these commands
+
+```
+jerry-tizenrt
+  ├── jerryscript
+  └── TizenRT
+```
+
+#### 2. Add jerryscript configuration for TizenRT
+
+```
+$ cp -r jerryscript/targets/tizenrt-artik053/apps/jerryscript/ TizenRT/apps/system/
+$ cp -r jerryscript/targets/tizenrt-artik053/configs/jerryscript/ TizenRT/build/configs/artik053/
+$ cp jerryscript/targets/tizenrt-artik053/romfs.patch TizenRT/
+```
+
+#### 3. Configure TizenRT
+
+```
+$ cd TizenRT/os/tools
+$ ./configure.sh artik053/jerryscript
+```
+
+#### 4. Configure TizenRT
+
+```
+$ cd ../../
+$ patch -p0 < romfs.patch
+$ cd build/output/
+$ mkdir res
+# You can add files in res folder
+# The res folder is later flashing into the target's /rom folder
+# CAUTION: You must not exceed 400kb
+```
+
+#### 5. Build JerryScript for TizenRT
+
+```
+# assuming you are in jerry-tizenrt folder
+$ cd jerryscript
+$ make -f targets/tizenrt-artik053/Makefile.tizenrt
+```
+
+#### 6. Build TizenRT binary
+
+```
+# assuming you are in jerry-tizenrt folder
+$ cd TizenRT/os
+$ make
+$ genromfs -f ../build/output/bin/rom.img -d ../build/output/res/ -V "NuttXBootVol"
+```
+Binaries are available in TizenRT/build/output/bin
+
+#### 7. Flash binary
+
+```
+make download ALL
+```
+
+For more information, see [How to program a binary](https://github.com/Samsung/TizenRT/blob/master/build/configs/artik053/README.md).
+
+
+#### 8. Run JerryScript
+
+You can use `minicom` for terminal program, or any other you may like, but set
+baud rate to `115200`.
+
+(Note: Device path may differ like /dev/ttyUSB1.)
+
+```
+sudo minicom --device=/dev/ttyUSB0 --baud=115200
+```
+
+Run `jerry` with javascript file(s)
+```
+TASH>>jerry hello.js                                                               
+Hello JerryScript!
+```
+
+Without argument it prints:
+```
+TASH>>jerry                                                                        
+No input files, running a hello world demo:                                        
+Hello World from JerryScript
+```