Merged target for mbed boards.

Merged the mbed releated targets into one source.
Available targets: FRDM-K64f, Discovery-STM32F4, Discovery-STM32F429ZI, NUCLEO-STM32F4

JerryScript-DCO-1.0-Signed-off-by: Imre Kiss kissi@inf.u-szeged.hu

targets/mbed/Makefile.mbed

@@ -0,0 +1,100 @@
+# Copyright 2015-2016 Samsung Electronics Co., Ltd.
+# Copyright 2016 University of Szeged.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# use TAB-8
+
+TYPE            = release
+TARGET_LIST     = k64f stm32f4 stm32f429i nucleo
+JERRYHEAP      ?= 16
+
+ifneq ($(filter $(board), $(TARGET_LIST)),)
+	TARGET        = $(board)
+ifeq ($(TARGET), k64f)
+	YOTTA_TARGET  = frdm-k64f-gcc
+	TARGET_DIR   ?= /media/$(USER)/MBED
+else ifeq ($(TARGET), stm32f4)
+	YOTTA_TARGET  = stm32f4-disco-gcc
+else ifeq ($(TARGET), stm32f429i)
+	YOTTA_TARGET  = stm32f429i-disco-gcc
+else ifeq ($(TARGET), nucleo)
+	YOTTA_TARGET  = st-nucleo-f401re-gcc
+	TARGET_DIR   ?= /media/$(USER)/NODE_F401RE
+endif
+
+UPPERC_TARGET = $(shell echo $(TARGET) | tr a-z A-Z) 
+INTERM        = build/obj-mbed-$(TARGET)
+OUTPUT        = build/bin/$(TYPE).mbed$(TARGET)
+COPYTARGET    = targets/mbed/libjerry
+
+else
+  $(error This board ($(board)) is not supported!)
+endif
+
+EXT_CFLAGS := -D__TARGET_MBED_$(UPPERC_TARGET)
+EXT_CFLAGS += -mlittle-endian -mthumb -mcpu=cortex-m4
+EXT_CFLAGS += -Wno-error=format=
+
+EXT_PORT_DIR := ""
+
+.PHONY: jerry js2c yotta flash clean
+
+all: jerry js2c yotta
+
+jerry:
+	mkdir -p $(INTERM)
+	mkdir -p $(OUTPUT)
+	mkdir -p $(COPYTARGET)
+	cmake -B$(INTERM) -H./ \
+	 -DENABLE_LTO=OFF \
+	 -DENABLE_VALGRIND=OFF \
+	 -DCMAKE_TOOLCHAIN_FILE=build/configs/toolchain_external.cmake \
+	 -DCOMPILER_DEFAULT_LIBC=ON \
+	 -DEXTERNAL_CMAKE_SYSTEM_PROCESSOR=arm7-m \
+	 -DEXTERNAL_CMAKE_C_COMPILER=arm-none-eabi-gcc \
+	 -DEXTERNAL_CMAKE_C_COMPILER_ID=GNU \
+	 -DEXTERNAL_COMPILE_FLAGS="$(EXT_CFLAGS)" \
+	 -DEXTERNAL_MEM_HEAP_SIZE_KB=$(JERRYHEAP) \
+	 -DEXTERNAL_PORT_DIR=$(EXT_PORT_DIR)
+
+	make -C $(INTERM) $(TYPE).external
+	cp `cat $(INTERM)/$(TYPE).external/list` $(OUTPUT)/.
+	cp $(OUTPUT)/lib$(TYPE).jerry-core.a $(COPYTARGET)/libjerrycore.a
+	cp $(OUTPUT)/lib$(TYPE).jerry-libm.lib.a $(COPYTARGET)/libjerrylibm.a
+
+js2c:
+	cd targets/mbed; ../tools/js2c.py;
+
+yotta:
+	cd targets/mbed; \
+	 yotta target $(YOTTA_TARGET); \
+	 yotta build
+
+flash:
+  ifndef TARGET_DIR
+    st-flash write targets/mbed/build/$(YOTTA_TARGET)/source/jerry.bin 0x08000000
+  else
+	  @if [ ! -d "${TARGET_DIR}" ] ; then \
+	   echo "The board not mounted at ${TARGET_DIR}"; \
+	   exit 1; \
+	  fi
+	  cp targets/mbed/build/$(YOTTA_TARGET)/source/jerry.bin \
+	   "$(TARGET_DIR)/."
+  endif
+	@echo "Wait till LED flashing stops..."
+
+clean:
+	rm -rf $(INTERM)
+	rm -rf $(OUTPUT)
+	rm -rf targets/mbed/build

targets/mbed/js/blink.js

@@ -0,0 +1,10 @@
+var check = 1;
+
+function blink ()
+{
+  var blk = (check > 8) ? 1 : 0;
+  led (0, blk);
+  check = (check >= 10) ? 1 : check + 1;
+}
+
+print ("blink js OK");

targets/mbed/js/main.js

@@ -0,0 +1,6 @@
+function sysloop (ticknow)
+{
+  blink ();
+}
+
+print ("main js OK");

targets/mbed/module.json

@@ -0,0 +1,12 @@
+{
+  "name": "jerry",
+  "version": "0.0.1",
+  "bin": "./source",
+  "private": true,
+  "description": "JerryScript in mbed",
+  "author": "",
+  "license": "Apache-2.0",
+  "dependencies": {
+    "mbed-drivers": "^1.5.0"
+  }
+}

targets/mbed/readme.md

@@ -0,0 +1,68 @@
+This folder contains files to run JerryScript in mbed / for:
+
+* Freedom-K64F (k64)
+* Discovery-STM32F4 (stm32f4)
+* Discovery-STM32F429ZI (stm32f429i)
+* Nucleo-F401RE (nucleo)
+
+####Yotta
+You need to install yotta before proceeding. Please visit [Yotta docs page](http://yottadocs.mbed.com/#installing-on-linux).
+
+####Cross-compiler
+For cross-compilation the GCC 5.2.1 is suggested to be used. All the supported targets were tested with this version. If you don't have any GCC compiler installed, please visit [this](https://launchpad.net/gcc-arm-embedded/+download) page to download GCC 5.2.1.
+
+####How to build a target
+Navigate to your JerryScript root folder (after you cloned this repository into the targets folder) and use the following command:
+
+```
+make -f targets/target-mbed/Makefile.mbed board=$(TARGET)
+```
+Where the `$(TARGET)` is one of the following options: `k64f`, `stm32f4`, `stm32f429i` or `nucleo`.
+This command will create a new folder for your target and build the jerryscript and mbed OS into that folder.
+
+####How to build a completely new target
+If you want to build a new target (which is not available in this folder) you have to modify the makefile.
+You have to add the new board name to the `TARGET_LIST` and you have to add a new branch with the new `YOTTA_TARGET` and a new `TARGET_DIR` path (if it neccessary) to the if at the top in the Makefile (just as you see right now).
+There is a little code snippet: 
+
+```
+ifeq ($(TARGET), k64f)
+  YOTTA_TARGET  = frdm-k64f-gcc
+  TARGET_DIR   ?= /media/$(USER)/MBED
+else ifeq ($(TARGET), stm32f4)
+  YOTTA_TARGET  = 
+```
+
+Basically, you can create a new target in this way (If the mbed OS support your board).
+
+#####Let's get into the details!
+1. The next rule is the `jerry` rule. This rule builds the JerryScript and copy the output files into the target libjerry folder. Two files will be generated at `targets/mbed$(TARGET)/libjerry`:
+  * libjerrycore.a
+  * libfdlibm.a
+
+  You can run this rule with the following command: 
+  - `make -f targets/target-mbed/Makefile.mbed board=$(TARGET) jerry`
+
+2. The next rule is the `js2c`. This rule calls a `js2c.py` python script from the `jerryscript/targets/tools` and creates the JavaScript builtin file into the `targets/mbed$(TARGET)/source/` folder. This file is the `jerry_targetjs.h`. You can run this rule with the follwoing command:
+
+  - `make -f targets/target-mbed/Makefile.mbed board=$(TARGET) js2c`
+
+3. The last rule is the `yotta`. This rule sets the yotta target and install the mbed-drivers module, install the dependencies for the mbed OS and finaly creates the mbed binary file. The binary file will be genrated at `targets/mbed$(TARGET)/build/$(YOTTA_TARGET)/source/jerry.bin`. You can run this rule with the following command: 
+
+  - `make -f targets/target-mbed/Makefile.mbed board=$(TARGET) yotta`
+
+4. Optional rule: `clean`. It removes the build folder from the target-mbed and jerry. You can run this rule with this command:
+
+  - `make -f targets/target-mbed/Makefile.mbed board=$(TARGET) clean`
+
+#####Flashing
+When the build is finished you can flash the binary into your board if you want. In case of ST boards you have to install the `st-link` software. Please visit [this page](https://github.com/texane/stlink) to install STLink-v2.
+You can flash your binary into your board with the following command:
+```
+make -f targets/target-mbed/Makefile.mbed board=$(TARGET) flash
+```
+The flash rule grabs the binary and copies it to the mounted board or use the STLink-v2 to flash.
+When the status LED of the board stops blinking, press RESET button on the board to execute JerryScript led flashing sample program in js folder.
+
+###Note
+If you use an STM32F4 board your build will stop with missing header errors. To fix this error please visit to [this page](http://browser.sed.hu/blog/20160407/how-run-javascripts-jerryscript-mbed) and read about the fix in the `New target for STM32F4` block.

targets/mbed/source/jerry_extapi.cpp

@@ -0,0 +1,130 @@
+/* Copyright 2014-2015 Samsung Electronics Co., Ltd.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+
+#include "jerry-core/jerry.h"
+#include "jerry_extapi.h"
+ 
+#include "native_mbed.h"
+
+#ifndef MIN
+#define MIN(A,B) ((A)<(B)?(A):(B))
+#endif
+
+//-----------------------------------------------------------------------------
+
+#define __UNSED__ __attribute__((unused))
+
+#define DECLARE_HANDLER(NAME) \
+static bool \
+NAME ## _handler (const jerry_api_object_t * function_obj_p __UNSED__, \
+                  const jerry_api_value_t *  this_p __UNSED__, \
+                  jerry_api_value_t *        ret_val_p __UNSED__, \
+                  const jerry_api_value_t    args_p[], \
+                  const jerry_api_length_t   args_cnt)
+
+#define REGISTER_HANDLER(NAME) \
+  register_native_function ( # NAME, NAME ## _handler)
+
+//-----------------------------------------------------------------------------
+
+DECLARE_HANDLER(assert)
+{
+  if (args_cnt == 1
+      && args_p[0].type == JERRY_API_DATA_TYPE_BOOLEAN
+      && args_p[0].u.v_bool == true)
+  {
+    printf (">> Jerry assert true\r\n");
+    return true;
+  }
+  printf ("ERROR: Script assertion failed\n");
+  exit (JERRY_STANDALONE_EXIT_CODE_FAIL);
+  return false;
+}
+
+DECLARE_HANDLER(led)
+{
+  if (args_cnt < 2)
+  {
+    return false;
+  }
+
+  int port, value;
+  port = (int)JS_VALUE_TO_NUMBER (&args_p[0]);
+  value = (int)JS_VALUE_TO_NUMBER (&args_p[1]);
+
+  ret_val_p->type = JERRY_API_DATA_TYPE_BOOLEAN;
+  if (port >=0 && port <= 3)
+  {
+    native_led(port, value);
+    ret_val_p->u.v_bool = true;
+  }
+  else
+  {
+    ret_val_p->u.v_bool = false;
+  }
+  return true;
+}
+
+//-----------------------------------------------------------------------------
+
+static bool
+register_native_function (const char* name,
+                          jerry_external_handler_t handler)
+{
+  jerry_api_object_t *global_obj_p;
+  jerry_api_object_t *reg_func_p;
+  jerry_api_value_t reg_value;
+  bool bok;
+
+  global_obj_p = jerry_api_get_global ();
+  reg_func_p = jerry_api_create_external_function (handler);
+
+  if (!(reg_func_p != NULL
+      && jerry_api_is_function (reg_func_p)
+      && jerry_api_is_constructor (reg_func_p)))
+  {
+    printf ("Error: create_external_function failed !!!\r\n");
+    jerry_api_release_object (global_obj_p);
+    return false;
+  }
+
+  jerry_api_acquire_object (reg_func_p);
+  reg_value.type = JERRY_API_DATA_TYPE_OBJECT;
+  reg_value.u.v_object = reg_func_p;
+
+  bok = jerry_api_set_object_field_value (global_obj_p,
+                                          (jerry_api_char_t *) name,
+                                          &reg_value);
+
+  jerry_api_release_value (&reg_value);
+  jerry_api_release_object (reg_func_p);
+  jerry_api_release_object (global_obj_p);
+
+  if (!bok)
+  {
+    printf ("Error: register_native_function failed: [%s]\r\n", name);
+  }
+
+  return bok;
+}
+
+void js_register_functions (void)
+{
+  REGISTER_HANDLER (assert);
+  REGISTER_HANDLER (led);
+}

targets/mbed/source/jerry_extapi.h

@@ -0,0 +1,38 @@
+/* Copyright 2015 Samsung Electronics Co., Ltd.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __JERRY_EXTAPI_H__
+#define __JERRY_EXTAPI_H__
+
+#define JERRY_STANDALONE_EXIT_CODE_OK   (0)
+#define JERRY_STANDALONE_EXIT_CODE_FAIL (1)
+
+#define API_DATA_IS_OBJECT(val_p) \
+    ((val_p)->type == JERRY_API_DATA_TYPE_OBJECT)
+
+#define API_DATA_IS_FUNCTION(val_p) \
+    (API_DATA_IS_OBJECT (val_p) && \
+    jerry_api_is_function ((val_p)->u.v_object))
+
+#define JS_VALUE_TO_NUMBER(val_p) \
+    ((val_p)->type == JERRY_API_DATA_TYPE_FLOAT32 ? \
+       static_cast<double>((val_p)->u.v_float32) : \
+    (val_p)->type == JERRY_API_DATA_TYPE_FLOAT64 ? \
+       static_cast<double>((val_p)->u.v_float64) : \
+    static_cast<double>((val_p)->u.v_uint32))
+
+void js_register_functions (void);
+
+#endif

targets/mbed/source/jerry_run.cpp

@@ -0,0 +1,128 @@
+/* Copyright 2014-2015 Samsung Electronics Co., Ltd.
+ * Copyright 2016 University of Szeged.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+
+#include "jerry-core/jerry.h"
+#include "jerry_extapi.h"
+#include "jerry_run.h"
+
+static const char* fn_sys_loop_name = "sysloop";
+
+int js_entry (const char *source_p, const size_t source_size)
+{
+  const jerry_api_char_t *jerry_src = (const jerry_api_char_t *) source_p;
+  jerry_completion_code_t ret_code = JERRY_COMPLETION_CODE_OK;
+  jerry_flag_t flags = JERRY_FLAG_EMPTY;
+  jerry_api_object_t *err_obj_p = NULL;
+  jerry_api_value_t err_value = jerry_api_create_void_value ();
+
+  jerry_init (flags);
+
+  js_register_functions ();
+
+  if (!jerry_parse (jerry_src, source_size, &err_obj_p))
+  {
+    printf ("Error: jerry_parse failed\r\n");
+    ret_code = JERRY_COMPLETION_CODE_UNHANDLED_EXCEPTION;
+    jerry_api_release_object (err_obj_p);
+  }
+  else
+  {
+    if ((flags & JERRY_FLAG_PARSE_ONLY) == 0)
+    {
+      ret_code = jerry_run (&err_value);
+      jerry_api_string_t *err_str_p = NULL;
+
+      if (err_str_p != NULL)
+      {
+        jerry_api_release_string (err_str_p);
+      }
+    }
+  }
+
+  return ret_code;
+}
+
+int js_eval (const char *source_p, const size_t source_size)
+{
+  jerry_completion_code_t status;
+  jerry_api_value_t res;
+
+  status = jerry_api_eval ((jerry_api_char_t *) source_p,
+                           source_size,
+                           false,
+                           false,
+                           &res);
+
+  jerry_api_release_value (&res);
+
+  return status;
+}
+
+int js_loop (uint32_t ticknow)
+{
+  jerry_api_object_t *global_obj_p;
+  jerry_api_value_t sysloop_func;
+  bool is_ok;
+
+  global_obj_p = jerry_api_get_global ();
+  is_ok = jerry_api_get_object_field_value (global_obj_p,
+                          (const jerry_api_char_t*) fn_sys_loop_name,
+                          &sysloop_func);
+  if (!is_ok)
+  {
+    printf ("Error: '%s' not defined!!!\r\n", fn_sys_loop_name);
+    jerry_api_release_object (global_obj_p);
+    return -1;
+  }
+
+  if (!API_DATA_IS_FUNCTION (&sysloop_func))
+  {
+    printf ("Error: '%s' is not a function!!!\r\n", fn_sys_loop_name);
+    jerry_api_release_value (&sysloop_func);
+    jerry_api_release_object (global_obj_p);
+    return -2;
+  }
+
+  jerry_api_value_t* val_args;
+  uint16_t val_argv;
+
+  val_argv = 1;
+  val_args = (jerry_api_value_t*) malloc (sizeof (jerry_api_value_t) * val_argv);
+  val_args[0].type = JERRY_API_DATA_TYPE_UINT32;
+  val_args[0].u.v_uint32 = ticknow;
+
+  jerry_api_value_t res;
+  is_ok = jerry_api_call_function (sysloop_func.u.v_object,
+                                   global_obj_p,
+                                   &res,
+                                   val_args,
+                                   val_argv);
+  jerry_api_release_value (&res);
+  free (val_args);
+
+  jerry_api_release_value (&sysloop_func);
+  jerry_api_release_object (global_obj_p);
+
+  return 0;
+}
+
+void js_exit (void)
+{
+  jerry_cleanup ();
+}

targets/mbed/source/jerry_run.h

@@ -0,0 +1,24 @@
+/* Copyright 2015 Samsung Electronics Co., Ltd.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __JERRY_RUN_H__
+#define __JERRY_RUN_H__
+
+int js_entry (const char *source_p, const size_t source_size);
+int js_eval (const char *source_p, const size_t source_size);
+int js_loop (uint32_t ticknow);
+void js_exit (void);
+
+#endif

targets/mbed/source/main.cpp

@@ -0,0 +1,75 @@
+/* Copyright 2014-2015 Samsung Electronics Co., Ltd.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed-drivers/mbed.h"
+
+#include "jerry-core/jerry.h"
+#include "jerry_run.h"
+
+#include "jerry_targetjs.h"
+
+static Serial pc (USBTX, USBRX); //tx, rx
+
+static int jerry_init (void)
+{
+  int retcode;
+  int src;
+
+  DECLARE_JS_CODES;
+
+  /* run main.js */
+  retcode = js_entry (js_codes[0].source, js_codes[0].length);
+  if (retcode != 0)
+  {
+    printf ("js_entry failed code(%d) [%s]\r\n", retcode, js_codes[0].name);
+    js_exit ();
+    return -1;
+  }
+  /* run rest of the js files */
+  for (src = 1; js_codes[src].source; src++)
+  {
+    retcode = js_eval (js_codes[src].source, js_codes[src].length);
+    if (retcode != 0)
+    {
+      printf ("js_eval failed code(%d) [%s]\r\n", retcode, js_codes[src].name);
+      js_exit ();
+      return -2;
+    }
+  }
+  return 0;
+}
+
+static void jerry_loop (void)
+{
+  static uint32_t _jcount = 0;
+
+  js_loop (_jcount++);
+}
+
+void app_start (int, char**)
+{
+  // set 9600 baud rate for stdout
+  pc.baud (9600);
+
+  printf ("\r\nJerryScript in mbed\r\n");
+  printf ("   build  %s\r\n", jerry_build_date);
+  printf ("   hash   %s\r\n", jerry_commit_hash);
+  printf ("   branch %s\r\n", jerry_branch_name);
+  
+  if (jerry_init () == 0)
+  {
+    minar::Scheduler::postCallback(jerry_loop).period(minar::milliseconds(100));
+  }
+}

targets/mbed/source/makejerry.cmake

@@ -0,0 +1,30 @@
+# Copyright 2015-2016 Samsung Electronics Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# application name
+set(MBEDMODULE "jerry")
+
+# add include jerry-core
+set(LJCORE ${CMAKE_CURRENT_LIST_DIR}/../../../)
+include_directories(${LJCORE})
+
+# compile flags
+set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mlittle-endian -mthumb -mcpu=cortex-m4" )
+
+# link jerryscript
+set(LJPATH ${CMAKE_CURRENT_LIST_DIR}/../libjerry)
+set(LJFILES "")
+set(LJFILES ${LJFILES} ${LJPATH}/libjerrylibm.a)
+set(LJFILES ${LJFILES} ${LJPATH}/libjerrycore.a)
+target_link_libraries(${MBEDMODULE} ${LJFILES})

targets/mbed/source/native_mbed.cpp

@@ -0,0 +1,25 @@
+/* Copyright 2014-2015 Samsung Electronics Co., Ltd.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed-drivers/mbed.h"
+
+#include "native_mbed.h"
+
+void native_led (int port, int val)
+{
+  static const PinName portmap[] = { LED1, LED2, LED3, LED4 };
+  static DigitalOut led (portmap[port]);
+  led = val;
+}

targets/mbed/source/native_mbed.h

@@ -0,0 +1,21 @@
+/* Copyright 2014-2015 Samsung Electronics Co., Ltd.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __NATIVE_MBED_H__
+#define __NATIVE_MBED_H__
+
+void native_led (int port, int val);
+
+#endif /* !__NATIVE_MBED_H__ */

targets/mbed/source/port/jerry_port.c

@@ -0,0 +1,87 @@
+/* Copyright 2016 University of Szeged.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define _BSD_SOURCE
+#include <stdarg.h>
+#include <stdlib.h>
+#include <sys/time.h>
+
+#include "jerry-core/jerry-port.h"
+
+#include "mbed-hal/us_ticker_api.h"
+
+/**
+ * Provide log message to filestream implementation for the engine.
+ */
+int
+jerry_port_logmsg (FILE *stream, /**< stream pointer */
+                   const char *format, /**< format string */
+                   ...) /**< parameters */
+{
+  va_list args;
+  int count;
+  va_start (args, format);
+  count = vfprintf (stream, format, args);
+  va_end (args);
+  return count;
+} /* jerry_port_logmsg */
+
+/**
+ * Provide error message to console implementation for the engine.
+ */
+int
+jerry_port_errormsg (const char *format, /**< format string */
+                     ...) /**< parameters */
+{
+  va_list args;
+  int count;
+  va_start (args, format);
+  count = vfprintf (stderr, format, args);
+  va_end (args);
+  return count;
+} /* jerry_port_errormsg */
+
+/**
+ * Implementation of jerry_port_fatal.
+ */
+void
+jerry_port_fatal (jerry_fatal_code_t code) /**< fatal code enum item */
+{
+  exit (code);
+} /* jerry_port_fatal */
+
+/**
+ * Implementation of jerry_port_get_time_zone.
+ * 
+ * @return true - if success
+ */
+bool
+jerry_port_get_time_zone (jerry_time_zone_t *tz_p) /**< timezone pointer */
+{
+  tz_p->offset = 0;
+  tz_p->daylight_saving_time = 0;
+  return true;
+} /* jerry_port_get_time_zone */
+
+/**
+ * Implementation of jerry_port_get_current_time.
+ *
+ * @return current timer's counter value in microseconds 
+ */
+double
+jerry_port_get_current_time ()
+{
+  return (double) us_ticker_read ();
+} /* jerry_port_get_current_time */