- Extract audioStreamGetPanFactors() into the shared layer, replacing
identical pan-to-LR math duplicated in the PSP and Dolphin backends
(and dropping a dead clamp - directionality's int8_t range already
guarantees pan stays in [-1, 1]).
- Implement audioStreamSetPosition() for real (was previously a no-op
that computed a value and threw it away) and add
audioStreamSetLoopPoints() to actually drive loopStart/loopTo, which
were previously dead fields with no setter at all. Both are threaded
through all three platform backends:
- PSP: the feeder thread now bounds each pass by the loop segment
and wraps to loopTo instead of always frame 0, while still filling
hardware chunks gaplessly.
- Dolphin: loopTo/loopStart map directly onto ansnd's existing
loop_start_offset/loop_end_offset, and startFrame onto start_offset.
- Linux: Buffer() now queues only the current segment, clearing the
SDL queue on an explicit seek but preserving the existing
overlap-based gapless loop restart otherwise.
- Linux: skip the mix scratch-buffer entirely at full volume, queuing
stream->data directly instead of allocating/zeroing/copying into one
every buffer call for no reason.
Verified no regression in the default (no seek, no loop points) case on
Linux/PPSSPP/Dolphin (-a LLE), and verified seek + loop-region behavior
manually via a temporary engine.c smoke-test tweak (reverted) showing
the expected faster loop cadence and seek-then-loop sequencing.
Splits the asset archive into a compressed (DEFLATE) zip and an
uncompressed (STORED) zip back to back behind a small header, instead of
one plain zip. DEFLATE-compressed zip entries aren't reliably seekable in
libzip, which caused locale string lookups (repeated rewind/reopen of the
same entry) to silently skip content on Dolphin specifically. Uncompressed
entries don't have that problem, so locale files now go in the stored
archive without needing to buffer the whole thing in memory.
Adds tools/asset/pack as the new packer (replacing the plain
`tar --format=zip`), a shared assetdsk.h/.c opener used by all platforms,
and a second ASSET.zipStored handle with fallback lookup in assetfile.c.
Confirmed working: Linux, PSP (PPSSPP), and Dolphin-FAT (Wii DOL under
-a LLE) - the original Dolphin locale lookup failure no longer reproduces.
Root cause of the crackle (confirmed on real PSP hardware): the
persistent feeder thread called stream->onLoop directly in the middle
of its tight chunk-feeding loop. onLoop can do arbitrary work (the
test callback does consolePrint, which locks a mutex, moves the
console history buffer, and fflushes stdout) - if that takes anywhere
close to one chunk's playback time (~23ms), the next chunk isn't
ready and the hardware channel starves. Audio callbacks must never be
invoked directly from a real-time audio thread.
Fixed generically: audiostream_t gains loopCount (incremented by
platform code from whatever context it runs in) and lastLoopCount
(main-thread-only bookkeeping). audioStreamUpdate() detects the
change and fires onLoop safely from the main thread, regardless of
which thread/interrupt actually noticed the loop. PSP's feeder thread
now increments the counter instead of calling onLoop inline.
Also eliminated the ~21.7ms of real silence padding baked into every
PSP loop pass (found while chasing the timing gap that preceded the
crackle fix): the final chunk's padding is now filled with the start
of the next loop instead of zero, avoiding sceAudioSetChannelDataLen
(the likely real cause of an earlier, separate click) while keeping
every output call the same constant size. Loop period measured via
PPSSPP is now ~1.000-1.002s for a 1.000s tone, down from a consistent
~1.02-1.03s before.
The PSP feeder thread is also now persistent for the stream's whole
lifetime (created once in Init, idles between plays) rather than
respawned via threadStartRequest on every single loop restart - real,
avoidable OS thread creation overhead that was contributing to the
gap before the padding was identified as the dominant cause.
Brought Dolphin in line architecturally rather than mirroring PSP/
Linux's restart-and-detect approach: ansnd_pcm_voice_config_t has
native loop_start_offset/loop_end_offset fields, so a looping Dolphin
voice loops entirely in DSP hardware with zero host involvement at
the loop boundary - no restart latency to create a gap in the first
place. Trade-off, clearly documented in code: onLoop never fires for
Dolphin this way (no ANSND_VOICE_STATE for "wrapped") and it requires
cleanly-authored loop content (no per-wrap fade like PSP's, matching
the same assumption). Compiles cleanly for both gamecube and wii;
not yet verified on real hardware.
Confirmed on real PSP hardware: no more gap, crackle fix pending
final hardware confirmation.
The previous fix (shrinking the final chunk's declared length via
sceAudioSetChannelDataLen) still clicked on real hardware. Reverted
that in favor of two changes that don't rely on that call's
undocumented mid-stream behavior: every call now sends a full,
constant AUDIO_PSP_CHUNK_FRAMES buffer with the tail simply
zero-padded (channel length is never changed after the initial
reserve), and a couple of extra all-silence chunks are fed after the
real audio + fade so the channel keeps being actively driven at zero
for a moment rather than stopping outright, in case some of the click
was the channel/DAC settling rather than a pure sample-domain
discontinuity.
Confirmed fixed on real PSP hardware.
The feeder's final chunk zero-padded up to the full 1024-frame
reserved size (e.g. 956 padding samples for a 68-sample remainder),
jumping straight from whatever amplitude the waveform ended at down
to silence - an audible click. Fixed two ways: fade the last 32 real
frames linearly to zero before any padding begins (also covers the
case where total length is an exact multiple of the chunk size, where
the waveform would otherwise just stop abruptly with no padding at
all), and declare only the real sample count via
sceAudioSetChannelDataLen (64-aligned) for the final chunk instead of
padding out to the full reserved length, shrinking the leftover
padding to under 64 samples. Channel length gets reset to the full
chunk size at the start of each feed pass in case a previous
playback left it shortened.
Verified via PPSSPP: sceAudioSetChannelDataLen(7, 1024) then (7, 128)
for the tone's 68-sample remainder, onEnd still fires once.
Root cause of the residual jitter (correlating with framerate, per
real-hardware testing): this project never overrides
PSP_MAIN_THREAD_PRIORITY, so the main/render thread runs at PSPSDK's
default of 32. A pthread created with default attributes (as
thread_t/threadStartRequest does) runs at priority 60 - numerically
higher, meaning LOWER scheduling priority on PSP's inverted scale.
Under load the feeder thread was structurally guaranteed to lose
scheduling contention to the main thread, starving the hardware
channel's double buffer and producing audible jitter that worsens
exactly when frames get slower - confirmed via disassembling
PSPSDK's precompiled pthread glue (pte_osThreadGetDefaultPriority
returns 60) rather than guessing.
audioStreamPSPThreadFeed now self-prioritizes via
sceKernelChangeThreadPriority(sceKernelGetThreadId(), 18) as the
first thing it does, matching the elevated-priority pattern PSP SDK
samples use for their own timing-sensitive auxiliary threads.
The original implementation reserved a channel sized to the whole
buffer (~44160 samples) and sent it in one sceAudioOutputPannedBlocking
call. Confirmed against the PSP SDK's own samples (pspaudiolib,
the mp3 sample) that this deviates from how PSP audio hardware is
actually meant to be driven: small fixed-size chunks (1024 frames,
matching pspaudiolib's own convention) fed continuously, decoupled
from the render loop. Reproduced as crackling on real hardware.
Now reserves a 1024-frame channel and runs a dedicated thread (the
project's existing thread_t abstraction, already used by asset.c and
already working on PSP via DUSK_THREAD_PTHREAD) that streams the
buffer chunk-by-chunk until exhausted, re-reading volume/pan every
chunk so live changes take effect mid-playback. Finish detection
switched from polling sceAudioGetChannelRestLength (which can't tell
"between chunks" from "actually done" once chunked) to a flag the
feeder thread sets on completion, same shape as the Dolphin voice
callback.
Verified via the dusk-psp toolchain and PPSSPP headless (channel now
reserved at 1024 frames instead of 44160, onEnd still fires once).
Real-hardware crackle-free confirmation pending.
Reserves a hardware channel per stream (64-aligned sample count,
mono/stereo format) and outputs through sceAudioOutputPannedBlocking,
giving PSP real stereo panning from directionality. Enforces the
44100Hz hardware-channel constraint with a clear error instead of
silently mispitching, and drops the shared test tone to 44100Hz to
match. Verified via the dusk-psp toolchain and a headless PPSSPP run
(correct channel reservation, onEnd firing once, no errors).
Cross-platform audiostream/audio API with per-platform hooks for
PSP/Dolphin/Linux. Linux is fully wired end-to-end through SDL2
(device open, volume-mixed queueing, finish detection via
SDL_GetQueuedAudioSize) and verified playing a generated test tone
in engine.c. PSP and Dolphin hooks are stubbed for now.
EBOOT.PBP packing was a POST_BUILD step with no dependency on the asset
pak, so an assets-only rebuild could silently leave a stale dusk.dsk
embedded. cmake/targets/psp.cmake now repacks EBOOT.PBP via a properly
tracked custom command depending on the executable, PARAM.SFO, and
dusk.dsk (and correctly embeds Dusk.prx rather than the raw ELF when
BUILD_PRX is on).
Separately, libzip's zip_source_filep_create (lazy seeked FILE* reads)
proved unreliable on real PSP hardware, corrupting reads of the embedded
PSAR (first EINVAL, then zlib data errors) even though the packaged data
was verified byte-perfect. assetInitPBP now reads the whole PSAR into
memory once and uses zip_source_buffer_create instead. Confirmed working
on real hardware.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
sceIoGetstat on a bare device root ("ms0:/") returns EINVAL on real
PSP hardware even when a memory stick is present - confirmed via a
diagnostic print during hardware testing. Switched to sceIoDopen/
sceIoDclose, the SDK's own documented way to probe a device root,
which real hardware handles correctly.
Also adds a temporary unconditional settings write once a save device
is selected, to confirm the write path itself works on hardware now
that availability detection is fixed.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Memory sticks/cards don't suit N+1 separate save files the way Linux's
filesystem does, so add an opt-in SAVE_DEVICE_DATA_RAW mode: settings and
all save slots get serialized to JSON, concatenated, zlib-compressed, and
framed with a magic/version/checksum/generation header, then read/written
as a single blob through one combined platform hook instead of four.
- PSP and Dolphin's SD/NAND backends write via a temp file + atomic rename,
so a crash mid-write can never leave a half-written save behind.
- GameCube memory cards have no rename or resize primitive, so they
ping-pong between two fixed files instead, picking whichever is valid and
has the higher generation counter on load.
- Linux is untouched (still four separate JSON files); saveslot.h/
savesettings.h drop their now-unnecessary pack(1) now that nothing
persists them as raw bytes.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
PSP checks memory-stick reachability via sceIoGetstat. GameCube gets two
devices (CARD_SLOTA/CARD_SLOTB), each mounted via CARD_Init/CARD_Mount and
checked for free space via CARD_GetDirectory/CARD_GetBlockCount. Wii picks
between three storage methods at compile time (DUSK_SAVE_WII_METHOD =
NAND/CARD/SD in wii.cmake, default NAND via ISFS) since real hardware
behavior for the default is unverified.
Also fixes two pre-existing bugs found while build/runtime-testing this
across PPSSPP and Dolphin: wrong libogc language macros in
systemGetLocaleDolphin, and a missing SYS_STDIO_Report(true) call that
silently swallowed all guest console output in Dolphin.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Removes the per-platform save/savestream/autosave implementations, the settings UI frames, and the autosave overlay, replacing them with a savemanager.c/h + savefile.h/savedevice.h scaffold to build the new save system on top of. Also separates the concrete UI_ELEMENTS registration into uielementlist.h/.c so uielement.c only holds the generic per-element lifecycle logic.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Splits the platform-agnostic network core out of dusk into a top-level
dusknetwork module, mirroring the duskgl/dusksdl2 pattern. Adds a
DUSK_NETWORK cmake option (default ON) so builds can exclude all
networking code, including the per-platform implementations.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Renames savefile_t to saveslot_t and folds last session's standalone
settings.h/.c module back in as savemeta_t, so there's one save system
(SAVE.slots[] + SAVE.meta) instead of two parallel ones - while letting
each platform pick its own physical format for the two concepts:
- Linux now writes human-editable JSON (slot0.json, settings.json, ...)
via yyjson's mutable writer API, so players can hand-fix a bad setting.
- PSP folds meta into the same sceUtilitySavedata binary payload as its
one save slot (SAVE_SLOT_COUNT_MAX=1 there - a future save picker will
let players manage multiple named saves via the OS's own browser).
- GameCube consolidates the 3 per-slot memory card files and the separate
settings file into one combined card file.
Also fixes two bugs surfaced while building this: the CRC finalize step
seeked to a hardcoded offset (only safe for one section per file, breaks
once meta+slots share a buffer), and save.c's async/sync dispatch left an
unconditional fallback call that doesn't exist on PSP-only platforms.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Deadzone (and future prefs like locale) now live in their own
settingsfile_t/settings.c, loaded eagerly at boot and saved immediately
on Apply, instead of inside savefile_t - a setting shouldn't reset or
diverge just because the player is on a different save slot, and this
also fixes settings changes not actually reaching disk until the next
full game Save.
PSP settings use a new plain sceIo path rather than sceUtilitySavedata,
since that dialog would flash its native icon on every settings tweak.
GameCube reuses the save system's existing memory card mount rather than
mounting it twice (settingsInit() now runs after saveInit()).
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Adds three new pieces of save-file state, all following the same shape:
the save file is the single source of truth, not a separate live runtime
copy that gets synced in/out.
- globalitemstore.h/.c: per-global-entity-ID "collected" flags
(savefile_t.globalItemCollected), so a global item entity's init
callback can check whether it was already picked up in a prior session
without needing to keep the entity itself alive to remember that.
- Gamepad deadzone: removed input_t.deadzone entirely. The setting UI and
every platform's actual deadzone-applying code (inputGetDeadzoneDolphin/
SDL2, previously hardcoded per-platform literals that the settings menu
didn't actually affect) now read savefile_t.deadzone directly via
saveGet(SAVE_ACTIVE_SLOT). Default lives in savefile.h
(SAVE_DEADZONE_DEFAULT), stamped onto every slot in saveInit().
- Story flags: STORY_FLAG_VALUES (a live, codegen-initialized array) is
replaced by savefile_t.storyFlags, read/written via the existing
storyFlagGet()/storyFlagSet() call sites (now macros/functions over the
active save file instead of a separate array). tools/story.py now
generates STORY_FLAG_DEFAULTS (const) instead; storyFlagInitDefaults()
stamps those onto a save the first time it's used (file->exists false),
called from rpgInit().
Added SAVE_ACTIVE_SLOT (0) to savefile.h as the one shared "which slot is
actually being played" constant, replacing three different local/implicit
0s (uigamemenu.c, rpg.c, and now the settings/input call sites).
Verified round-trip on Linux (all three together in one save/load cycle);
both Linux and PSP build clean.
Rewrote savepsp.c/savestreampsp.c to use sceUtilitySavedataInitStart/
Update/GetStatus/ShutdownStart instead of sceIoOpen/Read/Write, so PSP
saves get a proper OS-generated PARAM.SFO (title/savedataTitle/detail) and
show up correctly in the native save browser.
This dialog spans multiple frames and, per this project's prior experience
with the network config dialog, must be pumped non-blocking one step per
real engine frame rather than blocked on synchronously - a raw-sceGu
blocking loop already froze the app on real hardware for that dialog,
since pspGL owns the GU context. So save.h's saveWrite()/saveLoad() are
now callback-based (savecallback_t onComplete) instead of returning a
result directly, mirroring networkRequestConnection()'s shape, with a new
saveUpdate() (wired into engineUpdate()) pumping the active op each frame.
Linux/Dolphin behavior is unchanged - their fallback path in save.c still
completes synchronously, just via an immediate callback call instead of a
direct return.
Two real bugs found via PPSSPP testing (not just code review): SAVE/LOAD
modes show a confirm screen even for brand-new data, which blocks forever
headlessly - switched to AUTOSAVE/AUTOLOAD, which write/read silently and
generate the identical PARAM.SFO. And PPSSPP's dialog status goes straight
from QUIT to NONE without a separately observable FINISHED in between,
which the first version misread as "disappeared without a result" even on
a successful save - fixed by tracking whether QUIT was already seen.
Confirmed end-to-end in PPSSPP: write, dialog completes, PARAM.SFO +
encrypted save.bin appear on the virtual memory stick, and a subsequent
load decrypts/deserializes back to the exact original data. Not tested on
real PSP hardware.
- Fixed the actual reason saving never worked on any platform: saveWrite()
never stamped file->header/file->version before serializing, so every
written save file had a zeroed magic header and failed its own
validation on the next load. Confirmed via a manual write/load round
trip that this alone fully explains "saving doesn't work."
- Re-enabled saveInit()/saveDispose() in engine.c (previously commented out
under "Temporarily disable save code").
- Added SAVE.available + saveIsAvailable(), refreshed by every real
save/load/delete attempt. saveInit() no longer treats an unreachable
save medium as fatal to booting - it logs and continues, since a missing
memory card/stick shouldn't prevent playing.
- Hardened PSP's saveInitPSP() to actually detect a missing memory stick
(sceIoGetstat on ms0:/) instead of assuming success, and fixed
single-level sceIoMkdir to build the full PSP/SAVEDATA directory chain.
- Added busy-retry (CARD_ERROR_BUSY) and a not-mounted guard to Dolphin's
live savestreamdolphin.c path, extending the same handling already
backported into savedolphin.c.
- Added a "Save" entry to the game menu wired to saveWrite(0), showing a
clear message on success, on failure, and when saveIsAvailable() is false.
YourWishes
